Electricity Forum Electricity Today Magazine Arc Flash Training

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide


News & Trends


2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...


Introducing Intelligent Power Today

Welcome to Intelligent Power Today Magazine, our publication that explores and explains the who, what, where, when, why and how of intelligent electrical devices, a collection of complex mechanical devices and sophisticated control systems used in industrial, commercial, and institutional...

Electrical Safety

voltage testing

Absence of Voltage Testing – An Update on Accepted Approaches

Absence of voltage testing is a vital step in the process of verifying and establishing a de-energized state of any electrical system. As detailed in NFPA 70E clause 4.2.5., there is a specific and approved approach to establishing an electrical safe work condition with the following steps:

  • determine all possible source of electrical supply
  • interrupt the load current, open the disconnecting device for each possible source
  • verify where possible that all blades of the disconnecting devices are open
  • release or block any stored energy
  • apply lockout device in accordance with documented and established work procedures
  • using an adequately rated portable...

Workers & Safety Garments

It may seem like all flame-resistant (FR) garments are the same. After all, government regulations demand that every FR fabric protects workers to a certain degree. However, the real issue isn’t protection. The issue is compliance. For your workers to be compliant, protection and comfort must go hand in hand. You may have the highest protection in your FR garments, but if your workers leave them in their truck, they cannot provide the necessary protection.

Popular Electrical Safety Articles


Infrared and Electrical Safety

Infrared and electrical safety: meeting safety requirements using IR windows and thermal imaging BY COLIN PLASTOW, FLUKE Electronics By installing IR (infrared) windows, panes or ports, technicians using thermal imagers can inspect live electrical equipment without removing protective covers....
Electrical Safety Tools

Guide to Arc Flash Apps

Arc flash applications are increasing in popularity among engineers and electricians when examining hazards presented by an arc flash. Professionals search for accessible tools to help reduce dangers associated with arc flash as well as to assist in selecting adequate personal protective equipment...

Frequently Asked Questions about Arc Flash Relays

Answering frequently asked questions about arc flash relays BY BOB ZWEIFEL, Littelfuse The dangers of an arc flash incident—burns, blast, molten metal ejected at ballistic speeds—are by now familiar to every electrical worker. Most electrical professionals have read about strategies to minimize...