Electricity Forum Electricity Today Magazine Arc Flash Training

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide


News & Trends



2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...

Introducing Intelligent Power Today

Welcome to Intelligent Power Today Magazine, our publication that explores and explains the who, what, where, when, why and how of intelligent electrical devices, a collection of complex mechanical devices and sophisticated control systems used in industrial, commercial, and institutional...

Electrical Safety

Arc-Flash Hazard Calculations Guide Cover

Calculating Incident Energy

Over the last few decades, arc-fl ash hazards have been a significant concern for many electrical workers and employers. Many methods have been developed through the years to assess incident energy.
The most common is that of the IEEE 1584, Guide for Performing Arc-Flash Hazard Calculations. These equations have remained the same since the standard was first published in 2002. Based on the results of more than 1,800 tests, the 2018 edition of the guide provides new formulas that are both more accurate and more complex. These formulas also take more parameters into account now, including the conductor orientation at...

Workers & Safety Garments

It may seem like all flame-resistant (FR) garments are the same. After all, government regulations demand that every FR fabric protects workers to a certain degree. However, the real issue isn’t protection. The issue is compliance. For your workers to be compliant, protection and comfort must go hand in hand. You may have the highest protection in your FR garments, but if your workers leave them in their truck, they cannot provide the necessary protection.

Popular Electrical Safety Articles


Absence of Voltage Testing – An Update on Accepted Approaches

Absence of voltage testing is a vital step in the process of verifying and establishing a de-energized state of any electrical system. As detailed in NFPA 70E clause 4.2.5., there is a specific and approved approach to establishing an electrical safe work condition with the following...

Underestimating Arc Flash Hazards

While most discussions about arc flash involve the calculation methods and associated personal protective equipment (PPE), electricians have a number of ways to protect themselves and their gear, including arc-resistant equipment and remote actuation and racking systems that eliminate—rather than...

Safety Footwear

When it comes to on-the-job safety, footwear serves as the main point of contact between workers and their environment. Because of the key role safety boots play in personal protective equipment (PPE), it is important to consider the various safety, performance, and comfort features as they relate...