Electricity Forum Electricity Today Magazine Arc Flash Training
Intelligent Power Today Magazine
Archives

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide

News & Trends

2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...

Counterfeiting Kills

Each year, the counterfeiting of well-known brands and products continues to rise, creating an even more threatening problem. Such well-known counterfeited brands, including consumer safety and critical electrical products, are estimated to be five to seven percent of world trade. The International...

Electrical Safety

The Guide to Arc Flash Clothing

A new method to choosing personal protective equipment

BY JIM WHITE, Shermco Industries, Inc.

Table 130.7(C)(15)(a) in the 2012 edition of NFPA 70E: “Standard for Electrical Safety in the Workplace”, published by the National Fire Protection Association, has always been difficult for technicians and safety professionals to use in the field. Even though it has an outstanding record since being introduced in the 2000 edition of NFPA 70E, some members of the technical committee have been solidly against it.

One of those committee members stated that if the tables were eliminated, everyone would be forced to have an incident...

How to Improve Electrical Safety

Avoid hazards with these suggestions

BY ROB PROSSER & DANIELLE GALLO, Brady

With an increase in accidents and injuries occurring in a variety of industries, employers are looking for ways to reduce hazards and improve safety within their facilities. Even with a plethora of information available to supervisors, the inundation of all of these safety recommendations can be overwhelming and can result in even the most basic of mistakes. If you or your employees can relate, it is important to go back to the basics and review the most common issues contributing to electrical risks within facilities.

DE-ENERGIZE ALL EQUIPMENT...

Popular Electrical Safety Articles

Absence of Voltage Testing – An Update on Accepted Approaches

Absence of voltage testing is a vital step in the process of verifying and establishing a de-energized state of any electrical system. As detailed in NFPA 70E clause 4.2.5., there is a specific and approved approach to establishing an electrical safe work condition with the following...

Frequently Asked Questions about Arc Flash Relays

Answering frequently asked questions about arc flash relays BY BOB ZWEIFEL, Littelfuse The dangers of an arc flash incident—burns, blast, molten metal ejected at ballistic speeds—are by now familiar to every electrical worker. Most electrical professionals have read about strategies to minimize...

Arc Flash Mitigation 101

While the threat of shock and electrocution from inadvertent contact with energized parts has long been recognized, the arc flash and arc blast hazards have only fairly recently been incorporated into the electrical safety standards. The U.S. federal agency the Occupational Safety and Health...

Arc Flash Safety for Data Centers

15 arc flash mitigation strategies for the data center BY DAVID G. LOUCKS, Eaton Corporation Arc flashes—the fiery explosions that can result from short circuits in high-power electrical devices—kill hundreds of workers in the U.S. every year and permanently injure thousands more. They can also...