Electricity Forum Electricity Today Magazine Arc Flash Training

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide


News & Trends


Counterfeiting Kills

Each year, the counterfeiting of well-known brands and products continues to rise, creating an even more threatening problem. Such well-known counterfeited brands, including consumer safety and critical electrical products, are estimated to be five to seven percent of world trade. The International...

Introducing Intelligent Power Today

Welcome to Intelligent Power Today Magazine, our publication that explores and explains the who, what, where, when, why and how of intelligent electrical devices, a collection of complex mechanical devices and sophisticated control systems used in industrial, commercial, and institutional...

Electrical Safety

Arc Flash Mitigation 101

While the threat of shock and electrocution from inadvertent contact with energized parts has long been recognized, the arc flash and arc blast hazards have only fairly recently been incorporated into the electrical safety standards.

The U.S. federal agency the Occupational Safety and Health Administration (OSHA) enforces electrical workplace safety standards outlined in the National Fire Protection Association’s NFPA 70E: “Standard for Electrical Safety in the Workplace”. Basic compliance with guidelines in the NFPA 70E 2015 Edition, can be established with a five-step process.

Safe Electrical Maintenance Checklist

Reduce the risk of arc flash hazards with CSA Z462

BY ROBERT BURGESS, Lineman’s Testing Laboratories

Safe electrical maintenance practices and on-going personnel training can minimize the likelihood of electrical injuries and fatalities due to electrical shock, electrocution, arc flash and arc blast. At risk are employees who work on or near exposed energized electrical conductors or circuit parts including electrical maintenance personnel, operators, troubleshooters, electricians, linemen, supervisors, site safety personnel or anyone exposed to energized equipment of 50 volts or more. The majority of hospital admissions following electrical accidents are due to arc flash burns, not
electrical shock...

Popular Electrical Safety Articles


CSA Z462 and CSA Z463: A Powerful Combination

I recently viewed a destroyed 600-volt electrical panel board that had exploded when an operator reset an 800-ampere (A) breaker. His leather-palmed gloves had synthetic backs that ignited and seriously burned the back of his hands. His flame-resistant (FR) shirt was untucked and he was burned on...

Calculating Incident Energy

Over the last few decades, arc-fl ash hazards have been a significant concern for many electrical workers and employers. Many methods have been developed through the years to assess incident energy.The most common is that of the IEEE 1584, Guide for Performing Arc-Flash Hazard Calculations. These...

Workers & Safety Garments

It may seem like all flame-resistant (FR) garments are the same. After all, government regulations demand that every FR fabric protects workers to a certain degree. However, the real issue isn’t protection. The issue is compliance. For your workers to be compliant, protection and comfort must go...