Electricity Forum Electricity Today Magazine Arc Flash Training

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide


News & Trends



2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...

Introducing Intelligent Power Today

Welcome to Intelligent Power Today Magazine, our publication that explores and explains the who, what, where, when, why and how of intelligent electrical devices, a collection of complex mechanical devices and sophisticated control systems used in industrial, commercial, and institutional...

Electrical Safety

Infrared and Electrical Safety

Infrared and electrical safety: meeting safety requirements using IR windows and thermal imaging

BY COLIN PLASTOW, FLUKE Electronics

By installing IR (infrared) windows, panes or ports, technicians using thermal imagers can inspect live electrical equipment without removing protective covers. Unlike a port or pane, the additional protection afforded by infrared (IR) windows comes from their crystal optic construction, which is designed to better protect technicians under fault conditions resulting from unexpected component failures or work on other parts of the system. This substantially reduces hazard ratings and, in most cases, allows the thermographer to work more safely, minimizing the need...

Electrical Safety Lessons Learned

How to reduce electrical-related deaths and injuries to zero

BY JENIFER ROBERTSON, Electrical Safety Authority

Consider this scenario: An electrician is modifying an electrical circuit in a ceiling space at an educational institute. To perform the task, he de-energizes his specific circuit, but leaves the others in the same junction box energized.

While making the wiring modifications, the electrician makes incidental contact with a 347-volt, energized conductor with his right thumb and baby finger. He receives a shock.

Does this sound like a rarity? Well, it is not. In fact, this is a real-life incident that happened in Ontario—and it...

Popular Electrical Safety Articles


How to Improve Electrical Safety

Avoid hazards with these suggestions BY ROB PROSSER & DANIELLE GALLO, Brady With an increase in accidents and injuries occurring in a variety of industries, employers are looking for ways to reduce hazards and improve safety within their facilities. Even with a plethora of information available...

CSA Z462 and CSA Z463: A Powerful Combination

I recently viewed a destroyed 600-volt electrical panel board that had exploded when an operator reset an 800-ampere (A) breaker. His leather-palmed gloves had synthetic backs that ignited and seriously burned the back of his hands. His flame-resistant (FR) shirt was untucked and he was burned on...

Absence of Voltage Testing – An Update on Accepted Approaches

Absence of voltage testing is a vital step in the process of verifying and establishing a de-energized state of any electrical system. As detailed in NFPA 70E clause 4.2.5., there is a specific and approved approach to establishing an electrical safe work condition with the following...