Electricity Forum Electricity Today Magazine Arc Flash Training

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide


News & Trends


2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...


Introducing Intelligent Power Today

Welcome to Intelligent Power Today Magazine, our publication that explores and explains the who, what, where, when, why and how of intelligent electrical devices, a collection of complex mechanical devices and sophisticated control systems used in industrial, commercial, and institutional...

Electrical Safety

Arc-Flash Hazard Calculations Guide Cover

Calculating Incident Energy

Over the last few decades, arc-fl ash hazards have been a significant concern for many electrical workers and employers. Many methods have been developed through the years to assess incident energy.
The most common is that of the IEEE 1584, Guide for Performing Arc-Flash Hazard Calculations. These equations have remained the same since the standard was first published in 2002. Based on the results of more than 1,800 tests, the 2018 edition of the guide provides new formulas that are both more accurate and more complex. These formulas also take more parameters into account now, including the conductor orientation at...

Electrical Safety Lessons Learned

How to reduce electrical-related deaths and injuries to zero

BY JENIFER ROBERTSON, Electrical Safety Authority

Consider this scenario: An electrician is modifying an electrical circuit in a ceiling space at an educational institute. To perform the task, he de-energizes his specific circuit, but leaves the others in the same junction box energized.

While making the wiring modifications, the electrician makes incidental contact with a 347-volt, energized conductor with his right thumb and baby finger. He receives a shock.

Does this sound like a rarity? Well, it is not. In fact, this is a real-life incident that happened in Ontario—and it...

Popular Electrical Safety Articles


Safe Electrical Maintenance Checklist

Reduce the risk of arc flash hazards with CSA Z462 BY ROBERT BURGESS, Lineman’s Testing Laboratories Safe electrical maintenance practices and on-going personnel training can minimize the likelihood of electrical injuries and fatalities due to electrical shock, electrocution, arc flash and arc...

How to Improve Electrical Safety

Avoid hazards with these suggestions BY ROB PROSSER & DANIELLE GALLO, Brady With an increase in accidents and injuries occurring in a variety of industries, employers are looking for ways to reduce hazards and improve safety within their facilities. Even with a plethora of information available...

Frequently Asked Questions about Arc Flash Relays

Answering frequently asked questions about arc flash relays BY BOB ZWEIFEL, Littelfuse The dangers of an arc flash incident—burns, blast, molten metal ejected at ballistic speeds—are by now familiar to every electrical worker. Most electrical professionals have read about strategies to minimize...

Workers & Safety Garments

It may seem like all flame-resistant (FR) garments are the same. After all, government regulations demand that every FR fabric protects workers to a certain degree. However, the real issue isn’t protection. The issue is compliance. For your workers to be compliant, protection and comfort must go...