Electricity Forum Electricity Today Magazine Arc Flash Training
Intelligent Power Today Magazine
Archives

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide

News & Trends

Counterfeiting Kills

Each year, the counterfeiting of well-known brands and products continues to rise, creating an even more threatening problem. Such well-known counterfeited brands, including consumer safety and critical electrical products, are estimated to be five to seven percent of world trade. The International...

2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...

Electrical Safety

The Guide to Arc Flash Clothing

A new method to choosing personal protective equipment

BY JIM WHITE, Shermco Industries, Inc.

Table 130.7(C)(15)(a) in the 2012 edition of NFPA 70E: “Standard for Electrical Safety in the Workplace”, published by the National Fire Protection Association, has always been difficult for technicians and safety professionals to use in the field. Even though it has an outstanding record since being introduced in the 2000 edition of NFPA 70E, some members of the technical committee have been solidly against it.

One of those committee members stated that if the tables were eliminated, everyone would be forced to have an incident...

Infrared and Electrical Safety

Infrared and electrical safety: meeting safety requirements using IR windows and thermal imaging

BY COLIN PLASTOW, FLUKE Electronics

By installing IR (infrared) windows, panes or ports, technicians using thermal imagers can inspect live electrical equipment without removing protective covers. Unlike a port or pane, the additional protection afforded by infrared (IR) windows comes from their crystal optic construction, which is designed to better protect technicians under fault conditions resulting from unexpected component failures or work on other parts of the system. This substantially reduces hazard ratings and, in most cases, allows the thermographer to work more safely, minimizing the need...

Popular Electrical Safety Articles

IEEE Method Vs. the NFPA 70E Tables

IEEE Method Vs. the NFPA 70E Tables: Evaluating arc flash analysis methods BY REZA TAJALI, Schneider Electric Recent changes in workplace safety regulations have heightened the awareness of hazards associated with electrical arcs. The hazard level must be quantified and workers properly protected...

Arc Flash Safety for Data Centers

15 arc flash mitigation strategies for the data center BY DAVID G. LOUCKS, Eaton Corporation Arc flashes—the fiery explosions that can result from short circuits in high-power electrical devices—kill hundreds of workers in the U.S. every year and permanently injure thousands more. They can also...

Arc Flash Mitigation 101

While the threat of shock and electrocution from inadvertent contact with energized parts has long been recognized, the arc flash and arc blast hazards have only fairly recently been incorporated into the electrical safety standards. The U.S. federal agency the Occupational Safety and Health...

Electrical Safety Lessons Learned

How to reduce electrical-related deaths and injuries to zero BY JENIFER ROBERTSON, Electrical Safety Authority Consider this scenario: An electrician is modifying an electrical circuit in a ceiling space at an educational institute. To perform the task, he de-energizes his specific circuit, but...