Electricity Forum Electricity Today Magazine Arc Flash Training
Intelligent Power Today Magazine
Archives

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide

News & Trends

2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...

Counterfeiting Kills

Each year, the counterfeiting of well-known brands and products continues to rise, creating an even more threatening problem. Such well-known counterfeited brands, including consumer safety and critical electrical products, are estimated to be five to seven percent of world trade. The International...

Electrical Safety

Workers & Safety Garments

It may seem like all flame-resistant (FR) garments are the same. After all, government regulations demand that every FR fabric protects workers to a certain degree. However, the real issue isn’t protection. The issue is compliance. For your workers to be compliant, protection and comfort must go hand in hand. You may have the highest protection in your FR garments, but if your workers leave them in their truck, they cannot provide the necessary protection.

Arc Flash Mitigation 101

While the threat of shock and electrocution from inadvertent contact with energized parts has long been recognized, the arc flash and arc blast hazards have only fairly recently been incorporated into the electrical safety standards.

The U.S. federal agency the Occupational Safety and Health Administration (OSHA) enforces electrical workplace safety standards outlined in the National Fire Protection Association’s NFPA 70E: “Standard for Electrical Safety in the Workplace”. Basic compliance with guidelines in the NFPA 70E 2015 Edition, can be established with a five-step process.

Popular Electrical Safety Articles

The Guide to Arc Flash Clothing

A new method to choosing personal protective equipment BY JIM WHITE, Shermco Industries, Inc. Table 130.7(C)(15)(a) in the 2012 edition of NFPA 70E: “Standard for Electrical Safety in the Workplace”, published by the National Fire Protection Association, has always been difficult for...

Infrared and Electrical Safety

Infrared and electrical safety: meeting safety requirements using IR windows and thermal imaging BY COLIN PLASTOW, FLUKE Electronics By installing IR (infrared) windows, panes or ports, technicians using thermal imagers can inspect live electrical equipment without removing protective covers....

Safety Footwear

When it comes to on-the-job safety, footwear serves as the main point of contact between workers and their environment. Because of the key role safety boots play in personal protective equipment (PPE), it is important to consider the various safety, performance, and comfort features as they relate...

CSA Z462 and CSA Z463: A Powerful Combination

I recently viewed a destroyed 600-volt electrical panel board that had exploded when an operator reset an 800-ampere (A) breaker. His leather-palmed gloves had synthetic backs that ignited and seriously burned the back of his hands. His flame-resistant (FR) shirt was untucked and he was burned on...