Electricity Forum Electricity Today Magazine Arc Flash Training
Intelligent Power Today Magazine
Archives

News and Trends

Latest News From The Industry

NOMEX protective garment

Advanced protection against electromagnetic exposures and electric arc

HAZARDS AROUND

While working live in the energized grid, presence of voltage around the workers requires special attention. However, live-line (live working) techniques are widely applied for decades, several accidents in the past prove that the level of safety must be improved to minimize the number and seriousness of injuries in the future.
In the high voltage grid, bare-hand method is a common technique for safe live work. In the surroundings of any energized equipment,...

Buyer's Guide

News & Trends

2024 CE Code Training - Better Understanding of the Rules

CE Code training is intended to do a lot more than instruct about what changes have taken place since the last time Canada issued a national electrical code. We are producing a series of courses across Canada by one of Canada’s leading experts on the 2024 Edition of Canada’s Electrical...

Counterfeiting Kills

Each year, the counterfeiting of well-known brands and products continues to rise, creating an even more threatening problem. Such well-known counterfeited brands, including consumer safety and critical electrical products, are estimated to be five to seven percent of world trade. The International...

Electrical Safety

CSA Z462 and CSA Z463: A Powerful Combination

I recently viewed a destroyed 600-volt electrical panel board that had exploded when an operator reset an 800-ampere (A) breaker. His leather-palmed gloves had synthetic backs that ignited and seriously burned the back of his hands. His flame-resistant (FR) shirt was untucked and he was burned on his right side.

It is unfortunate that he was not following Canadian Standards Association’s CSA Z462 standard: “Workplace Electrical Safety” clause 4.3.7.3.10 (d). It is incredibly fortunate that his employer provided arc-rated clothing, as only a few years ago, he would have been wearing cotton coveralls.

Consequently, this incident would have resulted...

Safe Electrical Maintenance Checklist

Reduce the risk of arc flash hazards with CSA Z462

BY ROBERT BURGESS, Lineman’s Testing Laboratories

Safe electrical maintenance practices and on-going personnel training can minimize the likelihood of electrical injuries and fatalities due to electrical shock, electrocution, arc flash and arc blast. At risk are employees who work on or near exposed energized electrical conductors or circuit parts including electrical maintenance personnel, operators, troubleshooters, electricians, linemen, supervisors, site safety personnel or anyone exposed to energized equipment of 50 volts or more. The majority of hospital admissions following electrical accidents are due to arc flash burns, not
electrical shock...

Popular Electrical Safety Articles

Calculating Incident Energy

Over the last few decades, arc-fl ash hazards have been a significant concern for many electrical workers and employers. Many methods have been developed through the years to assess incident energy.The most common is that of the IEEE 1584, Guide for Performing Arc-Flash Hazard Calculations. These...

Infrared and Electrical Safety

Infrared and electrical safety: meeting safety requirements using IR windows and thermal imaging BY COLIN PLASTOW, FLUKE Electronics By installing IR (infrared) windows, panes or ports, technicians using thermal imagers can inspect live electrical equipment without removing protective covers....

Arc Flash Mitigation 101

While the threat of shock and electrocution from inadvertent contact with energized parts has long been recognized, the arc flash and arc blast hazards have only fairly recently been incorporated into the electrical safety standards. The U.S. federal agency the Occupational Safety and Health...

Underestimating Arc Flash Hazards

While most discussions about arc flash involve the calculation methods and associated personal protective equipment (PPE), electricians have a number of ways to protect themselves and their gear, including arc-resistant equipment and remote actuation and racking systems that eliminate—rather than...